?
English簡體中文Customer Service : 0086 -773- 5870889 / 0086 -773- 8989089

Product
vented liner


we aim to help reduce packaging costs for our clients by providing them with a unique solution to any number of problems they may encounter. Bloating, panelling, and leaking products will prevent customers from purchasing a product. Our vented liners allow bottles to breathe, relieving outward or inward pressures while preventing product leakage. The unique structural properties of our vented liners allow for free air exchange through our microporous membrane while preventing your product from leaking.
Method using the sealed  liner
A. Sealed  liner, use method

I. Qualified corresponding sealed liner material into the bottle cap, a bottle of contact is screwed on the bottle, aluminum foil, aluminum foil gasket contact bottle must be made sufficiently complete;


II . Adjust the electromagnetic induction sealing device (hand-held electromagnetic induction sealing machine to adjust the time parameters of electromagnetic induction sealing machine, automatic adjustment of power parameter), adjust the parameters according to different material;


III .The bottle upright on the heating head down, do not touch the oral closure, oral closure cap (flat) 2-3MM (distance shall be not more than 5MM), sealing operation;


IV .Sealed, wait 1 minutes, open the bottle cap, check the sealing effect;


V. The sealing effect of qualified should be: aluminum foil smoothness and integrity of the seal on the bottle, with a marginal hands gently, no separation phenomenon, if it is two piece of aluminum foil liner, aluminum foil surface should be clean and free of wax residue, if it is a piece of aluminum foil liner shall be smooth without wrinkles;
feedback

Online feedback

Feedback to us, we will contact you shortly. (The following * are mandatory)

Refresh
BACK
?